Page 2 of 2
Posted: 02 Jun 2008, 13:48
by Syncro G
mal0r wrote:My speedo bounces between 15 mph and 45 mph when I'm trying to do about 30, so I tend to only let it bounce as high as 30 or so when going past a camera
Speedo cable needs a bit of oil, though not too much as that can make them overead if it works its way into the clock.
Posted: 02 Jun 2008, 13:54
by mal0r
Thanks Syncro G, I'll look into doing that, I guess it will take some of the fun out of town-driving though.
Posted: 02 Jun 2008, 14:15
by Syncro G
mal0r wrote:Thanks Syncro G, I'll look into doing that, I guess it will take some of the fun out of town-driving though.
Well I think you can make them better, but curing them completely is unlikely so theres always a bit amusement to be had. 15MPH gets mine excited and it clatters against the stopper. Thinking about it maybe the force of that under repeated cyclic loading causes the neadle to slowly move on its spindle over the years, thus explaining why the neadle overead massively (35% error) and needed to be recalabrated?