Page 2 of 2

Posted: 12 Mar 2008, 12:57
by syncroand101
Have you tried the idle stabiliser?

Similar symptoms on my old 2.1 DJ were solved by bypassing this, (simple male-> female plug connection) and later replacing it.

Posted: 12 Mar 2008, 18:57
by wasserleaker
boxxie, im pretty sure the engine will just stop if you disconnect the temp. sender that the ECU gets a reading from, cant remember which of the 2 on the thermostat housing it is, one is for the dash gauge. best bet to just replace it