Posted: 07 Nov 2007, 20:06
the white wire does nowt 
just leave it a loan
just leave it a loan
Toomanytoys check out this site http://www.eberspacher.com/faq.php?section=support#q3 good luck
TTFN Kris O Krisis
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
eberspacher install pics ?
Page 2 of 3
Posted: 07 Nov 2007, 21:00
Thank you T'Onion
Toomanytoys check out this site http://www.eberspacher.com/faq.php?section=support#q3 good luck
TTFN Kris O Krisis
Toomanytoys check out this site http://www.eberspacher.com/faq.php?section=support#q3 good luck
TTFN Kris O Krisis
Posted: 07 Nov 2007, 21:53
Krisis - think on this link somewhere
http://www.eberspacher.com/files/pdfs/a ... manual.pdf
it tells you max/min wire length to battery (page 11)
http://www.eberspacher.com/files/pdfs/a ... manual.pdf
it tells you max/min wire length to battery (page 11)
Posted: 07 Nov 2007, 22:50
Elvis, ball pein?!?!?!?!?!?
and thank you for the link
ATB Kris o Krisis
and thank you for the link
ATB Kris o Krisis
Posted: 07 Nov 2007, 22:56
hammer comes out tomoz ! only own 2 , a big one and an even bigger one
only own 2 , a big one and an even bigger one Posted: 08 Nov 2007, 09:57
Elvis if I didnt know better I would say that you own a Landrover in a previous life
TTFN Kris O Krisis
TTFN Kris O Krisis
Posted: 08 Nov 2007, 11:57
yep ,actually a whole pile of em , what gave it away 
Posted: 08 Nov 2007, 12:24
Cheers
Had 12.5 volts on a big tractor batery so power couldnt have been a problem... it just did nowt...
I have a manual and all it says is volts, or a diagnostic tool required...
if its had too many restarts and failed then that also stops them from coming on, but only can only be cleared by uing the diagnostic tool supposedly...
Suppose thats what I will have to do then...
Had 12.5 volts on a big tractor batery so power couldnt have been a problem... it just did nowt...
I have a manual and all it says is volts, or a diagnostic tool required...
if its had too many restarts and failed then that also stops them from coming on, but only can only be cleared by uing the diagnostic tool supposedly...
Suppose thats what I will have to do then...
Posted: 08 Nov 2007, 13:36
Where do you get a diagnostic tool from and what exactly does it do ? I bet it costs a fortune.
I would love to see what such a tool would say when mine fails to start occasionally.... Can you keep them connected permanently ?
Thanks
Ringo
I would love to see what such a tool would say when mine fails to start occasionally.... Can you keep them connected permanently ?
Thanks
Ringo
Posted: 08 Nov 2007, 13:43
Posted: 08 Nov 2007, 14:01
OK... thats just what I need then....
Cheers mr T'O
Cheers mr T'O
Posted: 08 Nov 2007, 14:44
ELVIS wrote:hammer comes out tomoz !
IT WAS THIS BIT !!!!!! ATB Kris O Krisis
Posted: 09 Nov 2007, 18:45
Dear Toomanytoys,
Mine wont start unless I have 13.6volts, I think that its just one of those 'Eberpacher' things.
If you find a way that it will start up at a lower voltage please let me know.
ATB Kris O Krisis
Mine wont start unless I have 13.6volts, I think that its just one of those 'Eberpacher' things.
If you find a way that it will start up at a lower voltage please let me know.
ATB Kris O Krisis
eberspacher install
Posted: 13 Nov 2007, 17:01
I fitted one to a Landrover a few years ago. Your right - without 13.5 volts it won't start. I had same problem, battery in front, heater at back. Only cure to constant niggling problem is make the wires thick enough. I got hold of really heavy cable, about 5mm thick,from auto electrician. That fixed it. Voltage drop is the main problem in long distance fixings. Talk to an Eberspacher agent or good auto electrician.
Posted: 13 Nov 2007, 17:09
Krisis , thought i had posted the tech link ? look at your model and the notes will give you wire thickness/length