Posted: 18 Oct 2007, 11:39
Are, I'm free on the 1st; should be a laff then, count me in.
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
Yorkshire Dales, 1st and maybe 2nd Dec??? Date changed
Page 2 of 3
Posted: 11 Nov 2007, 21:15
Is this weekend actually happening, all gone quiet. Have serious engine upgrade, will tow you all out when you run out of power.
Posted: 11 Nov 2007, 22:17
Yes, its still on. Spoke with Kev before he left the country - gone on holiday but will be back in time for the weekend.
Trust the gearbox will be able to cope with all that power!
Trust the gearbox will be able to cope with all that power!
Posted: 21 Nov 2007, 07:35
Yep tis still happening
How does meeting at Brickwerks for tea and biccys on the Saturday morning, driving a few lanes around holmfirth way sat afternoon, then heading up to Helwith to camp Saturday night followed by sunday on the lanes in the dales?
How does meeting at Brickwerks for tea and biccys on the Saturday morning, driving a few lanes around holmfirth way sat afternoon, then heading up to Helwith to camp Saturday night followed by sunday on the lanes in the dales?
Posted: 22 Nov 2007, 20:29
That sounds good to me - I'm partial to Ginger Nuts
Doug
Doug
Posted: 23 Nov 2007, 19:28
anyone else?
Posted: 23 Nov 2007, 21:37
I can probably manage the whole packet myself.
Posted: 26 Nov 2007, 16:27
Still up for it, though I'm still missing a front driveshaft and front locker doesn't work so its only RWD at the moment. Got some better tyres though so I'll see how it goes, think I'll be looking for a spare seat if the lanes are hard.
If I could get some welding done during one of the days then I'd have to run away and get that done so might only be around 1 day +sat night; for the time being lets say both days, I'll let you know if thinks change Kev.
If I could get some welding done during one of the days then I'd have to run away and get that done so might only be around 1 day +sat night; for the time being lets say both days, I'll let you know if thinks change Kev.
Posted: 26 Nov 2007, 21:44
You will manage most of Holme Valley if not all in 2WD I reckon, Cheese Gate Nab Side may be a bit tricky.
Posted: 27 Nov 2007, 20:23
Much though I wanted to come to this, I have an opportunity to get some welding done on my single-cab, so I won't be coming. Have a good one.
See https://club8090.co.uk/forum/viewtopic.php?p=210718.
Andy
See https://club8090.co.uk/forum/viewtopic.php?p=210718.
Andy
Posted: 27 Nov 2007, 20:28
syncroandy wrote:Much though I wanted to come to this, I have an opportunity to get some welding done on my single-cab, so I won't be coming. Have a good one.
See https://club8090.co.uk/forum/viewtopic.php?p=210718.
Andy
What about the mard a*** one?
Posted: 27 Nov 2007, 20:32
Eh ?
Posted: 27 Nov 2007, 21:05
syncroandy wrote:Eh ?
The shiney one with one of them weird engines.
Posted: 28 Nov 2007, 15:20
I am hoping to make, it not sure whether 2WD or 4WD.
Kev
Have you got an itinary
What time are you meeting at Baxters What time depart and finish on Saturday.
Will not be camping.
What time start on Sunday. Any Idea on route and finish
Sorry to ask so many questions
Got to fit in with the Wife and Kids.
Also a pal with a 90 is interested.
Thanks to Baxter and Ghia for the advise re head back on DOKA
got the timing 1 notch out.
Only need MOT and viscous fitting (thanks mike for loan of VC)
and I am ready.
Syncro Ambulance will not be ready, cylinder head scrap.
Bloomin dweisels
Kev
Have you got an itinary
What time are you meeting at Baxters What time depart and finish on Saturday.
Will not be camping.
What time start on Sunday. Any Idea on route and finish
Sorry to ask so many questions
Got to fit in with the Wife and Kids.
Also a pal with a 90 is interested.
Thanks to Baxter and Ghia for the advise re head back on DOKA
got the timing 1 notch out.
Only need MOT and viscous fitting (thanks mike for loan of VC)
and I am ready.
Syncro Ambulance will not be ready, cylinder head scrap.
Bloomin dweisels
Posted: 28 Nov 2007, 19:00
Gotcha Andy. No go, as I'll involved in the pickup repair work, Pete does the welding, I stand around asking stupid questions, make tea occasionally, and spray on a bit of paint.