Posted: 16 Jan 2006, 22:12
my spacer is made from 30 amp wire 
but it is solid
but it is solidone day
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
Steering Column problem
Page 2 of 2
Posted: 20 Jan 2006, 10:05
I'll get round to fixing this ....
one day
one day
Posted: 02 Feb 2006, 09:15
Right , I've finally order the parts I think I need
part numbers 5 & 16 off the above diagram. Took the column apart on Tuesday afternoon and found that the top bearing was worn and because I might need the spacer I though it would be best to but a new standard spacer and cut a bit of the old one to make up the extra 3-5mm required.
I will try and get some piccies of the job as I go along so it can be Wickied
part numbers 5 & 16 off the above diagram. Took the column apart on Tuesday afternoon and found that the top bearing was worn and because I might need the spacer I though it would be best to but a new standard spacer and cut a bit of the old one to make up the extra 3-5mm required.
I will try and get some piccies of the job as I go along so it can be Wickied