Page 2 of 2
Re: T25 1.6D easy to stall, no low rpm torque
Posted: 09 Jul 2020, 13:28
by lefty67
I have a 5 speed dog leg and you have to push down and across for 1st and reverse. 1st to 2nd takes a bit of getting used to but easy enough after a while.
Re: T25 1.6D easy to stall, no low rpm torque
Posted: 09 Jul 2020, 13:45
by Paul773car
OK so maybe it was meant to be like that. I'm going to investigate the linkages and the lever and see what's happening. My understanding is though that if it's working properly we shouldnt have push down to get into 1st
Paul
Re: T25 1.6D easy to stall, no low rpm torque
Posted: 09 Jul 2020, 15:13
by Oldiebut goodie
I never had to push down for 1st on my 5 speed box. If you do need to it's because of the 4 speed linkage in the box under the lever I am given to understand.
Re: T25 1.6D easy to stall, no low rpm torque
Posted: 09 Jul 2020, 17:33
by lefty67
Just been out to check and I dont have to push down to get into1st or reverse, mind you I've only had the van 5yrs.
Re: T25 1.6D easy to stall, no low rpm torque
Posted: 09 Jul 2020, 17:56
by Paul773car
Thanks all so mines definitely a "wrong un" then
