Page 2 of 2

Re: Jx not starting after install

Posted: 11 May 2019, 17:37
by Oldiebut goodie
NO switch instead of NC? As to why you might have 2 wronguns ........

Re: Jx not starting after install

Posted: 11 May 2019, 18:03
by jaber
What’s is NC?

Re: Jx not starting after install

Posted: 11 May 2019, 18:12
by Oldiebut goodie
Normally open/normally closed.

Re: Jx not starting after install

Posted: 11 May 2019, 18:35
by jaber
Cheers, although still not understanding, engine was a runner with one of the switches and the other came from another runner both jxtd
How do i rectify this problem?

Steve

Re: Jx not starting after install

Posted: 12 May 2019, 06:28
by ajsimmo
JX has two switches, low (NC) and high (NO). Sounds like you have somehow swapped the wires, or fitted two high, normally open switches. From memory, the blue/black wire goes to low switch at back of head, yellow wire to high switch on filter housing.
And you're welcome on the bulb trick :-)

Sent from my ONEPLUS A3003 using Tapatalk

Re: Jx not starting after install

Posted: 12 May 2019, 07:41
by jaber
You sir are a star, I think I may have the wrong switch in the head will take a look shortly

Steve