Page 2 of 2
Re: Cab doors locking mechanisms
Posted: 07 Mar 2018, 22:54
by maxstu
Before taking the door card off - I assume it can be done via the interior handle & leave the cable floppy in the door (still attached to the internal bit of the exterior door handle / mechanism).
Door card off and remove two bolts holding internal lever to door frame. This will release tension on connecting rod between lever and door lock mechanism. Release lever and tape rod to internal of door. Then re attach door lever and door card.
Cannot comment on MOT issue though.
Re: Cab doors locking mechanisms
Posted: 08 Mar 2018, 11:00
by hightop ratty
maxstu wrote:
Before taking the door card off - I assume it can be done via the interior handle & leave the cable floppy in the door (still attached to the internal bit of the exterior door handle / mechanism).
Door card off and remove two bolts holding internal lever to door frame. This will release tension on connecting rod between lever and door lock mechanism. Release lever and tape rod to internal of door. Then re attach door lever and door card.
Cannot comment on MOT issue though.