Re: B post and inner Sill
Posted: 26 Jun 2017, 21:21
what2do wrote:When altering your power adjust the wire feed too. Learn to weld that little bit faster when at higher amps and it'll help prevent burning holes in your tin.
Cheers
Went back and re welded as per photo
Had to add a plate as holed it..!
Not sure if my welder is ok, seems huge gap between the two top settings.
Yes read the welder manual, I know, sorry
which said up feed rate with higher settings..Thanks again for all the advice..!!
Sent from my iPhone using Tapatalk