Club 80-90 Forums

itchyfeet wrote:look on the diagram I posted
it fits into the tank

itchyfeet wrote:I can't see it, Maybe part of the pump?
http://www.realoem.me/Volkswagen/RDW/T2 ... 955/148000" onclick="window.open(this.href);return false;

Thanks!

Smosh wrote:

craigy345 wrote:

what2do wrote:Maybe one isn't fitted and a good, strong pump prevents it from dropping back down to the tank. Perhaps mine is a little fatigued, hence the problem. I'll order the non-return valve and report back. Thanks to all.

Had the same problem, then my pump eventually packed up.
New pump (not expensive £10 approx) really easy to fit.
Not seen the fault since.

Worth a try for a tenner if nothing else obvious works!?

Silly question time... where is the pump located? I haven't seen mine, but mine doesn't work. I haven't investigated at all yet though to be honest.

I do know where the washer tank is though!

I think your question of 'where's the pump?' has now been answered.

If you drop the tank (a few bolts) the pump will come down with it (obviously still with the electrical connections/wiring attached)

My money is on, that your pump is not working correctly or on its way out and not giving enough pressure. (mine was with the same symptoms you describe)

Have you had a look at the connections to the pump.
I assume you haven't?
Worth making sure these are clean and not corroded.
Then test the pump with a 12v supply. (when I did this mine finally died) - replaced (£10) and all fine since.

Thanks to all that helped. May I ask where you sourced your pumps from please? Thanks in advance. Mitch.

looks like VWH have them

https://www.vwheritage.com/shop/2519556 ... 5-1980-92/" onclick="window.open(this.href);return false;

or this may last longer
http://www.ekmpowershop16.com/ekmps/sho ... 1152-p.asp" onclick="window.open(this.href);return false;

itchyfeet wrote:looks like VWH have them

https://www.vwheritage.com/shop/2519556 ... 5-1980-92/" onclick="window.open(this.href);return false;

or this may last longer
http://www.ekmpowershop16.com/ekmps/sho ... 1152-p.asp" onclick="window.open(this.href);return false;

What's your theory for the heritage one not lasting? Is it a 'cheap 'n nasty'?

It's never going to be the same quality as origional.