Re: 1.6 TD JX T.BELT change and timing PART NUMBERS NEEDED
Posted: 25 Oct 2015, 20:11
ZsZ wrote:Hello Ed!
I think the cheapest solution would be to source the parts locally.
The guys who manage the prague bus club are running a webshop. They sell good quality parts.
http://www.vwbusshop.cz/tesneni/tesneni ... 1-6td.html" onclick="window.open(this.href);return false;
http://www.vwbusshop.cz/diesel/napinaci-kladka-ina.html" onclick="window.open(this.href);return false;
http://www.vwbusshop.cz/diesel/rozvodov ... -zubu.html" onclick="window.open(this.href);return false;
yes yes yes!!!! Thanks Zoltan! Kösz! This is what I need! MUCH better to get INSIDE the Czech Rep. because duty charges are 30% and postage is absurd - on the other hand, postage within the country are peanuts, and zero duty!
I need to get much more familiar with the Czech language WORDS for all of these things, then it will be easier, much easier for me!!!
NEXT QUESTION: (perhaps I should start another thread?)
1. I figure since my valve cover (rocker cover) will be off to do the belt change, I should do the VALVE LASH ADJUSTMENTS at the same time... for this surely I will need to source some of the small SHIMS which are required to adjust the clearances.... does anyone know the name of these shims (good luck then translating into Czech!)? I hope they have them at the vwbusshop.cz) --- and lastly does anyone know of any videos showing the procedure for doing the VALVE LASH ADJUSTMENTS on a JX engine?
THANKS!!