Page 2 of 2
Re: CB users? help
Posted: 23 Jul 2015, 12:10
by ghost123uk
Have you checked the SWR on the aerial recently?
Re: CB users? help
Posted: 23 Jul 2015, 12:20
by wee bugger
dont have a meter

Re: CB users? help
Posted: 23 Jul 2015, 12:27
by ghost123uk
Well if this is a new installation, you really should check it.
At least check the aerial mount is correctly earthed to the bodywork . Use your multimeter set to it's lowest amps rating but unplug the aerial plug from the CB before doing the test. As close to zero ohms is what you're looking for as in like a dead short). Unless its a mag mount, in which case ignore the above

Re: CB users? help
Posted: 23 Jul 2015, 12:48
by wee bugger
ghost123uk wrote:Well if this is a new installation, you really should check it.
At least check the aerial mount is correctly earthed to the bodywork . Use your multimeter set to it's lowest amps rating but unplug the aerial plug from the CB before doing the test. As close to zero ohms is what you're looking for as in like a dead short). Unless its a mag mount, in which case ignore the above

Its on a mag mount...

Re: CB users? help
Posted: 23 Jul 2015, 14:18
by ghost123uk
That should be OK then, and those "springer" aerials are pretty well pre-SWR'd and are a good aerial as well.