Page 2 of 2
Re: fit a rev counter and temperature gauge and oil gauge t25 19
Posted: 05 Apr 2015, 12:32
by silverbullet
kevtherev wrote:Your redline is braver than mine.
The red needle is different, looks good
Never experienced a wbx go off the end of the tacho then Kev?
It's quite a noise...
(Frozen throttle cable on a DG and it survived)
Re: fit a rev counter and temperature gauge and oil gauge t25 19
Posted: 05 Apr 2015, 14:20
by itchyfeet
I though wbx were supposed to have a rev limiting rotor arm, mine has, 5600 I think.
Re: fit a rev counter and temperature gauge and oil gauge t25 19
Posted: 05 Apr 2015, 14:41
by silverbullet
This one didnt! Absolutely screamed, must have been high side of 7k
Re: fit a rev counter and temperature gauge and oil gauge t25 19
Posted: 17 Jun 2015, 22:25
by DoubleOSeven
Any Janet and John wiring schematic for a rev counter retro fit? A feed from the - coil pin is it??
Re: fit a rev counter and temperature gauge and oil gauge t25 19
Posted: 18 Jun 2015, 05:52
by kevtherev
The tacho will have wiring instructions.
But it is usually the alternator or coil yes.