Page 2 of 3

Re: Giggle pin replacement

Posted: 04 Mar 2014, 19:14
by kevtherev
Lubrication is important jeff.
Without it the giggle pin would seize in the fuffle.. with burning and a lot of damage

imagine that :shock:

Re: Giggle pin replacement

Posted: 04 Mar 2014, 19:15
by weldore
dripping is the preferred method

Re: Giggle pin replacement

Posted: 04 Mar 2014, 19:17
by jeffdub
it doesn't bare thinking about kev , im off to lube mine up now :D

Re: Giggle pin replacement

Posted: 04 Mar 2014, 19:53
by kevtherev
jeffdub wrote:it doesn't bare thinking about kev , im off to lube mine up now :D

lucky bastid :evil:

Re: Giggle pin replacement

Posted: 04 Mar 2014, 19:56
by Ralf85
For crying out loud Kev grease it up, I can hear the squeak down here!
:wink:

Re: Giggle pin replacement

Posted: 04 Mar 2014, 20:16
by jrt
discipleofsketch wrote:If you can't fix it, new fuffle bars are available here: http://www.fudgeheaven.co.uk/index.php?page=BARS" onclick="window.open(this.href);return false;
Those bars aren't any good wont last 12 months-made of chocolate :)
My mate used these[Chinese imports] http://www.ehow.com/way_5788062_easy-cr ... -bars.html" onclick="window.open(this.href);return false; may last a bit longer but i'm not 100% sure.
David

Re: Giggle pin replacement

Posted: 04 Mar 2014, 20:30
by trucker
nevill3 wrote:The Brazilian bush is a polly bush so is much smaller than a British bush but due to EU regulations the British bush has now been discontinued. However I have heard that the Germans are refusing to adhere to the new EU standard and have remained untrimmed
:rofl :rofl :rofl Brilliant :ok

Re: Giggle pin replacement

Posted: 04 Mar 2014, 21:36
by MidLifeCrisis
kevtherev wrote:My fuffle bar is squeaking, I am suspecting the giggle pin, or the bushes.
Please add your fuffle bar type to your signature so people can help you more easily :roll: :roll:
And have you checked your earths??

Re: Giggle pin replacement

Posted: 04 Mar 2014, 21:55
by Reimotim
I can't believe no one has mentioned greasing the nipples. :roll:
This is essential maintenance, neglect this at your peril!

Re: Giggle pin replacement

Posted: 05 Mar 2014, 08:03
by itchyfeet
kevtherev wrote:Lubrication is important jeff.
Without it the giggle pin would seize in the fuffle.. with burning and a lot of damage

imagine that :shock:


I have found the older models need more lubrication than the younger ones as the bushes dry out over time.

Re: Giggle pin replacement

Posted: 05 Mar 2014, 10:26
by Cruz
Then it needs lubricating with sp 1 t spray

Re: Giggle pin replacement

Posted: 05 Mar 2014, 11:36
by ladybird
whats a giggle pin

Re: Giggle pin replacement

Posted: 05 Mar 2014, 12:52
by kevtherev
It's a euphemism.

Re: Giggle pin replacement

Posted: 05 Mar 2014, 12:53
by Cruz
It's real. Like a fluffle valve!

Re: Giggle pin replacement

Posted: 05 Mar 2014, 18:15
by itchyfeet
When i was quite young i remember my first ride in a T3, it was quite an young van also, i was so excited but it was a bit embarrasing really becuase every time i got out it made a sort of farting noise from the lower bush :oops:
it's never happened with any of my later vans :D