Page 2 of 3
Re: In need of a new VC
Posted: 05 Aug 2013, 23:29
by footstuck
Well done mate
Thats outed the 'Hocus Pocus' that exists around the subject.
I’ve always had the suspicion that most failures would be a case
of cooked oil.
Did you allow any particular amount of air inclusion, or just
go by the weight of oil between those two amounts?
Re: In need of a new VC
Posted: 06 Aug 2013, 06:11
by syncro up
Whats the going rate for a replacement VC these days?
Re: In need of a new VC
Posted: 06 Aug 2013, 08:35
by hugomonkey
512 euros exchange from busschmeide, did´nt worry about the amount of air just the weight, i think mine had 283 grams and others had a bit more and a bit less, we cant tell the difference, cost me £40 to do mine so at the end of the day even if it doesn´t work you haven´t lost much and if you think about it most of the vc`s out there are contaminated with gearbox oil to some degree and they still work, maybe not as well as when it was new but i´ve never felt a new vc and probably never will, from what i hear from Aidan the quality of "proffesionally" refurbed VC´s has gone through the floor so its just a case of getting a few mates together and getting on with it
Re: In need of a new VC
Posted: 06 Aug 2013, 10:36
by SyncroRich
Hi Jason,
did you get your silicon oil from the same place as the seals?
Regards,
Rich

Re: In need of a new VC
Posted: 06 Aug 2013, 11:55
by hugomonkey
a friend of ours sourced everything through IG 16 in germany as they had just done a load, im trying to get hold of a few sets as we speak should know more in a couple of weeks, the oil on dieselkontor.de is 100,000 viscosity which is way too agressive unless you have a decoupler and only use 4wd offroad, i used 60,000 and that suited me just fine, i think i heard talk of the originals being a mixture of 25,000 and 60,000
Re: In need of a new VC
Posted: 06 Aug 2013, 12:32
by jes*b
rich- where are you on the south coast

Re: In need of a new VC
Posted: 06 Aug 2013, 13:13
by Syncrobaz
What beer do you recommend ?

Re: In need of a new VC
Posted: 06 Aug 2013, 13:17
by hugomonkey
tuborg but it has to be brewed in denmark, maybe it would be a good idea to try different brands and see if there is any diference

Re: In need of a new VC
Posted: 06 Aug 2013, 13:44
by Syncrobaz
I'll try becks and see how it goes !!

Re: In need of a new VC
Posted: 06 Aug 2013, 13:46
by silverbullet
I think it's time that the FlybyNight Club got it's act together once more and had a bit of a visco session. Atlantis is now grim to park on tarmac and I don't want to break anything.
Re: In need of a new VC
Posted: 06 Aug 2013, 14:10
by jes*b
We need the seals everything else is in place
Re: In need of a new VC
Posted: 06 Aug 2013, 15:33
by silverbullet
Excellent!
Re: In need of a new VC
Posted: 06 Aug 2013, 18:59
by SyncroRich
Jes
Hythe but not your Hythe. Southampton.
Re: In need of a new VC
Posted: 06 Aug 2013, 20:13
by max and caddy
Hmmm ex mountain rescue bus...interesting.
Re: In need of a new VC
Posted: 06 Aug 2013, 21:41
by SyncroRich
[quote="max and caddy"]Hmmm ex mountain rescue bus...interesting.[/quote
You and my bus got history?
