Club 80-90 Forums

havent been able to take any photos yet but here is a picture of one anyway
http://www.holdsworth.vwt25camper.info/ ... illaWM.pdf" onclick="window.open(this.href);return false;

the mk2 version had a solid sided pop top with gas struts

Like it alot, bet you don't see many of them hanging about, was thinking of one of these, the front opening one.http://www.poptop-parts.co.uk/devon-t25.htm" onclick="window.open(this.href);return false;

So have found a nice Devon Pop top..once the hi top is off what needs to bee done before fitting the new roof, gonna get it all re re furbed, painted, new seals ,struts etc, just need an idea about replacing the roof skin and stuff. cheers.

Anyone?

Have tried this on the camper section, to no joy, i am taking the hi top off my Komet, have a devon side elevating to replace it. when the hi top is off what needs doing obviously it will need a roof skin but what else needs to be considered? oh will need the gutter sorting too whilst at it. cheers

What do you mean by a roof skin?
The hole in the roof should be the same, or depending on how old the Devon roof is, not big enough.

When you take the fibreglass outer off there is a whole wooden frame bit inside if its the same as the one I have seen apart.

I have retitled your thread to attract the at tension of people who maybe able to help, as "new roof " didn't really say much as a headline!

Hmm, are you intending to sort a bunk up there or is it just for headroom when parked.
can then advise
mm

dont need a bed per se prob something to pop bits and bobs up when parked up, was thinking the wood that is there would suffice.

I ve just taken a devon side lifting roof off and on again if you get everything with the top you ve bought should think fairly easy if ya know what your doing? Would get a few friends round to help thou them roofs are well heavy :s

right, if you have the new pop to hand and its complete with the mounting moulding etc then off with your hitop and you will be left with a hole i would remove the pop fabric and sepparate the lid from the rest and then ofer up the pop base to your van , this way you will get a better idea of what may or may not need removing , and get the camera out and start adding ssome picks so we can better advise
mm

1st pic is of the moulded top that's fixed to roof this what canvas gets fixed to and the dampers to lift the top up so make sure you get that spot on!
Also be carefully taking the canvas off if in good condition? I had to make my own!unless you want to wait up 8 weeks for a company to make 1?

Am taking the roof off the van thats donor as a template so will just be a transplant on with the hole in the right spot, my worry is whats lurking under to hi top and the gutter needs attention too.

Like metalmick8y said take the roof off and take some pics? Did you say your getting the roof skin as well with the poptop? If so you may be able to cut the gutter section off that to repair yours?

as per my pm , also remember we have a member local to you and me that makes canvas and i have a.n. other that can make within the week so no issues there but try to keep intact as a pattern, you pick your time of year, you got inside work area (works maybe )or out in the sunshine
mm