Club 80-90 Forums

I do like the Andreas springs, and could be tempted if a set turn up... But do you not need longer shocks too?
Cost is €500 for a set

wonder what they´d be like on a sika

hugomonkey wrote:wonder what they´d be like on a sika

Way too light a van for them you'd have serious problems with CV angles

even with the uprated cv joints??

Yep would say so reckon my camper and just about gets away with the HD ones myself and dai have tmore or less the same set up apart from shocks and are on the limits of the cv's as the vans are too light a single cab wouldn't work

Have sent Andreas a pm.. have you seen the driveshafts he's working on?.....
http://www.ig-syncro16.de/forum/index.p ... er&start=0" onclick="window.open(this.href);return false;

From what I remember all the aftermarket springs will sag relatively quickly with the exception of Baxter's and Lidl's. This is probably because the latter two haven't been around long enough to get any data but I would reckon Baxter's would be the best bet no matter which variation Syncro you have.

lloydy wrote:Have sent Andreas a pm.. have you seen the driveshafts he's working on?.....
http://www.ig-syncro16.de/forum/index.p ... er&start=0" onclick="window.open(this.href);return false;

Is he not working on front CVJ boots? I'd like to see what he comes up with cuz the Spidan ones I have fitted are rubbish!

one set of Andreas springs later...........

Sent you a pm have fun fitting them