Club 80-90 Forums

Hi all,

I am refurbishing the front cv boot protectors. Metal parts have been blasted and powder coated and I found a strong piece of rubber that looks the same as the old one (also it was expensive, 30 euro for half a meter...)

Do any of you have the shape and dimensions to cut the rubber to the original shape? Maybe a 1:1 scale in a pdf or something?

Thank you!

Google phill landers he has an Australian syncro website with the drawings for the metal work and the boots.

Neil

axeman wrote:Google phill landers he has an Australian syncro website with the drawings for the metal work and the boots.

Neil

Here you go:

http://members.ozemail.com.au/~pjlander ... racket.pdf

http://members.ozemail.com.au/~pjlander ... Rubber.pdf

Lefteris, I made a set to Neil's pattern and they worked a treat only ..... The rubber I used was approx 5/6 mm thick and not sure if its a 16" think or not but I had trouble compressing the rubber enough to get a good fit . When I do the next set I will experiment with thinner rubber.

poshbuggers wrote:Here you go:

http://members.ozemail.com.au/~pjlander ... racket.pdf

http://members.ozemail.com.au/~pjlander ... Rubber.pdf

Dammit. That's another job to go on the list. Stop it you guys.

Thank you guys for the links and tips!

I will post some photos once I do them.