Early sliding door middle bearing removal
Posted: 27 Oct 2019, 17:55
Hi guys, I'm in the process of stripping down my sliding door mechanism for a full bearing overhaul and clean up, but I can't for the life of me work out how to remove the bearing circled in the image attached.
It looks like there is a nylon plug on one side, but I'm reluctant to just start pulling it out, in case I'm missing something.
Has anybody on here done this before and if so could you please advise me on the process to remove it properly.
Thanks in advance
Andy
Sent from my CLT-L09 using Tapatalk
It looks like there is a nylon plug on one side, but I'm reluctant to just start pulling it out, in case I'm missing something.
Has anybody on here done this before and if so could you please advise me on the process to remove it properly.
Thanks in advance
Andy
Sent from my CLT-L09 using Tapatalk