Page 1 of 1
Tow bar wiring help
Posted: 06 Apr 2021, 16:40
by Cataldoodledoo
Hi, I have the below tow bar and just need help deciphering the wiring.
I have two looms going to the left and towards the black box in the engine bay, and one red wire going to the rear drivers side light.
Any diagrams/instructions around?
Thanks!
Re: Tow bar wiring help
Posted: 07 Apr 2021, 21:19
by Robsey
That red wire looks like an after-thought.
Possibly a split charge wire for a caravan leisure battery. If done properly, it should be controlled via a relay.
Or perhaps a rear fog cut-out circuit...
The wire colours for the rear light clusters are...
This is the white barrel plug in the junction box.
T7/1 = Black / White for left indicator
T7/2 = Black / Green for right indicator
T7/3 = Black / Red for both brake lights
T7/4 = Grey / White for the rear fog light
T7/5 = Grey / Black for left tail light
T7/6 = Grey / Red for right tail light
T7/7 = Brown for chassis / earth for both rear clusters.
and then there is the separate black / blue wire for the reverse light.
There may be a mechanism on the rear fog light wire to prevent it lighting up when a caravan is hitched up.
If it was me, I would want to look inside the connector boots to see where the red wire actually goes.
Re: Tow bar wiring help
Posted: 08 Apr 2021, 19:06
by Cataldoodledoo
Red wire goes to the rear left indicator, posted on another thread by accident!
Hoping I can get rid of it and use the main looms going from each of the tow sockets.