VW Electrics Haynes wiring diagrams

From VW T25(T3)-Tech
Revision as of 10:37, 12 January 2008 by Hacksawbob (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

--Possiedon-- Hi, Hot on the trail of mu faulty wipers (and now heater switch as fog light switch) I now suspect that there is a + feed problem. I have checked the fuses and also all the switchs work if I send them a + from a different feed...

I've traced the fault back using haynes to the fuse box area... more specifically something marked as x...

At the top of the diagram there are 4 lines marked

30 ---- 15 ---- x ----- 31 ----

can anyone tell me what these mean? I need to track down X..



--Syncro G-- 30 - perminant live from battery terminal 15 - swtiched live from igniton switch (also live when starters running) X - switched live, works only when key is in the run position, not the start position. This is for high current stuff like headlights, fanmotors and heating elements and reduices the load on the battery when starting - those circuits don't apear to stop working when you run the starter because of voltage drop, they stop working because they are actully turned off. 31 - earth. Theres also an earth at the bottem of the page.

If you follow the lines long enough you can see where they are powered from and link back to the battery. For the X and 15 wireing look at the igniton switch and headlight switch pages.

The headlights are powered off the X circuit but they actully come off it before the relay which controls anything else powered from X - the line at the top of the page. Hence, if the X relay breaks all X powered stuff will stop working except the headlights which should still work.