VW Electrics Hazzard and indicators
From VW T25(T3)-Tech
Revision as of 13:00, 26 June 2014 by Hacksawbob (talk | contribs) (Created page with ' Hazard switch test '''Bubble Meister Brickyard''' You'll need a piece of electric wire. Remove the plug from the back of the hazard warning switch. Use the wire to bridge th…')
Hazard switch test
Bubble Meister Brickyard
You'll need a piece of electric wire. Remove the plug from the back of the hazard warning switch. Use the wire to bridge the terminals in the plug as follow; With the ignition on bridge terminals 15 - 49. Operate the indicator and the indicators should work. Try it too with 30 - 49, the indicators should work. The terminal numbers are normally stamped on the back of the hazard warning switch. 15 is the power supply from the ignition. 30 is the power supply from the battery. 49 is the feed to the indicator system. If you have a haynes manual the wiring diagrams at the back will help.
