Difference between revisions of "Camping Interior Zig Units"
m |
m |
||
| Line 17: | Line 17: | ||
'''CF8''' Pinouts (not tested retreived from another site) | '''CF8''' Pinouts (not tested retreived from another site) | ||
Pinout for the back | Pinout for the back <br> | ||
Check the back of the Zig unit. If it's a CF8, then the wires running into the back are quite simple. | Check the back of the Zig unit. If it's a CF8, then the wires running into the back are quite simple. | ||
Revision as of 01:35, 5 March 2011
Zig Unit Description and Purpose
Zig Electronics contact:
ZIG Electronics Ltd Saxon Business Park Hanbury Road Stoke Prior BROMSGROVE B60 4AD
Tel: 01527 556715
Pinouts
CF8 Pinouts (not tested retreived from another site)
Pinout for the back
Check the back of the Zig unit. If it's a CF8, then the wires running into the back are quite simple.
From the left hand side, you should find a connector block numbered from 1, through to 11.
1 and 2 are fed from the split charge relay from the engine charging circuit.
3 and 4 go to the liesure battery
On the Zig unit, ALL ODD NUMBERS are NEGATIVE, ALL EVEN NUMBERS are POSITIVE DO NOT MIX THEM UP.
Terminals 5 and 6 are normally used for the water pump
7 and 8 for another peice of kit, such as an extractor fan,
9 and 10 is the interior lighting circuit.
Documentation
Broadband recommended for the following link PDF version of the CF8 Manual (cf6 is same as cf8)3.25MB
