Difference between revisions of "Camping Interior Zig Units"
Willoughby (talk | contribs) m |
m |
||
| Line 1: | Line 1: | ||
==Zig Unit Description and Purpose== | |||
Zig Electronics contact: | Zig Electronics contact: | ||
| Line 10: | Line 12: | ||
Tel: 01527 556715 | Tel: 01527 556715 | ||
==Pinouts== | |||
'''CF8''' | '''CF8''' Pinouts (not tested retreived from another site) | ||
(not tested retreived from another site) | |||
Pinout for the back | Pinout for the back | ||
| Line 33: | Line 33: | ||
9 and 10 is the interior lighting circuit. | 9 and 10 is the interior lighting circuit. | ||
==Documentation== | |||
Broadband recommended for the following link | Broadband recommended for the following link | ||
| Line 38: | Line 40: | ||
[[Image:Cf6-8.JPG]] | [[Image:Cf6-8.JPG]] | ||
==Other== | |||
Revision as of 01:35, 5 March 2011
Zig Unit Description and Purpose
Zig Electronics contact:
ZIG Electronics Ltd Saxon Business Park Hanbury Road Stoke Prior BROMSGROVE B60 4AD
Tel: 01527 556715
Pinouts
CF8 Pinouts (not tested retreived from another site)
Pinout for the back Check the back of the Zig unit. If it's a CF8, then the wires running into the back are quite simple.
From the left hand side, you should find a connector block numbered from 1, through to 11.
1 and 2 are fed from the split charge relay from the engine charging circuit.
3 and 4 go to the liesure battery
On the Zig unit, ALL ODD NUMBERS are NEGATIVE, ALL EVEN NUMBERS are POSITIVE DO NOT MIX THEM UP.
Terminals 5 and 6 are normally used for the water pump
7 and 8 for another peice of kit, such as an extractor fan,
9 and 10 is the interior lighting circuit.
Documentation
Broadband recommended for the following link PDF version of the CF8 Manual (cf6 is same as cf8)3.25MB
