Difference between revisions of "Diesel - Injectors"
From VW T25(T3)-Tech
Jump to navigationJump to searchm |
|||
| Line 2: | Line 2: | ||
They are torqued to 70 Nm (51 ft-lb ) | They are torqued to 70 Nm (51 ft-lb ) | ||
---- | |||
'''SimonBaxter:''' DO NOT SKIMP ON THE FLAME TRAPS or your injectors won't last 2 minutes | '''SimonBaxter:''' DO NOT SKIMP ON THE FLAME TRAPS or your injectors won't last 2 minutes | ||
Latest revision as of 14:16, 1 November 2008
These ideally require a special (deep and thin walled) 27mm socket to remove and refit
They are torqued to 70 Nm (51 ft-lb )
SimonBaxter: DO NOT SKIMP ON THE FLAME TRAPS or your injectors won't last 2 minutes
Tighten injector pipes to 25 Nm (18 ft-lb), ensure the union are hand tightened first so they are not cross-threaded or under undue stress from the pipes (bent)
Make sure that the (anti-vibration) pipe support clamps are replaced and fit well.
