Difference between revisions of "Camping Interior Zig Units"
Lone Gunman (talk | contribs) |
|||
| Line 33: | Line 33: | ||
9 and 10 is the interior lighting circuit. | 9 and 10 is the interior lighting circuit. | ||
[http://www.club80-90.co.uk/docs/zig-cf8.pdf PDF version of the CF8 Manual (about 3.25MB)] | |||
Revision as of 20:12, 2 February 2006
Zig Electronics contact:
ZIG Electronics Ltd Saxon Business Park Hanbury Road Stoke Prior BROMSGROVE B60 4AD
Tel: 01527 556715
CF8
(not tested retreived from another site)
Pinout for the back Check the back of the Zig unit. If it's a CF8, then the wires running into the back are quite simple.
From the left hand side, you should find a connector block numbered from 1, through to 11.
1 and 2 are fed from the split charge relay from the engine charging circuit.
3 and 4 go to the liesure battery
On the Zig unit, ALL ODD NUMBERS are NEGATIVE, ALL EVEN NUMBERS are POSITIVE DO NOT MIX THEM UP.
Terminals 5 and 6 are normally used for the water pump
7 and 8 for another peice of kit, such as an extractor fan,
9 and 10 is the interior lighting circuit.
