Difference between revisions of "Areas that rust - Snorkel box"

From VW T25(T3)-Tech
Jump to navigationJump to search
m
Line 1: Line 1:
Notice the water that drips in through the vent grill above, and can end up damaging the Idle Stabiliser Control Unit (on 2.1 injections), rusting the  seam above the chassis, dripping down inot the chassis and rusting that badly as well (the bottom filler plate)
This is behind the tail-lights..
 
Notice the water that drips in through the air-intake vent grill above, and can end up damaging electrical units (on injected petrols), rusting the  seam above the chassis, dripping down into the chassis and rusting that badly as well (the bottom filler plate)


[[Image:CHS IMG 2828(640).jpg]]
[[Image:CHS IMG 2828(640).jpg]]
One solution is to at least drill a hole in the centre of the floor where the pressed fingers cross... so water can drain down and out

Revision as of 10:58, 11 July 2010

This is behind the tail-lights..

Notice the water that drips in through the air-intake vent grill above, and can end up damaging electrical units (on injected petrols), rusting the seam above the chassis, dripping down into the chassis and rusting that badly as well (the bottom filler plate)

CHS IMG 2828(640).jpg

One solution is to at least drill a hole in the centre of the floor where the pressed fingers cross... so water can drain down and out