Difference between revisions of "VW Electrics Smooth 12v/5v supply"
m |
m |
||
| Line 1: | Line 1: | ||
Covkid: | Covkid: | ||
These days, we run laptops and other items that need a smoother or even reduced supply compared to the nominal 12.5V supply, | These days, we run laptops and other items that need a smoother or even reduced supply compared to the nominal 12.5V supply, and if the engine is running, the voltage can reach 14v. A raw supply is fine for some items but most modern electronics require a bit more precision than this. For instance, the dash clocks in a T25 use a fixed 10v regulated supply for part of the circuit and this is achieved by a voltage regulator fixed to the back of the clocks rated at 10v. | ||
Relatively cheap, voltage regulators have three legs and in various sizes including but not limited to: | Relatively cheap, voltage regulators have three legs and in various sizes including but not limited to: | ||
| Line 9: | Line 9: | ||
LM7812 (12v) | LM7812 (12v) | ||
With the addition of a few capacitors to further smooth out the supply, you can build a simple and effective power source at one or more voltage levels. They're cheap and easy to build and a whole lot less than ones you can buy - even on ebay. | With the addition of a few capacitors to further smooth out the supply, you can build a simple and effective power source at one or more voltage levels. They're cheap and easy to build and a whole lot less than ones you can buy - even on ebay. Check the amp rating will be suitable for your appliance. | ||
Heres a summary of the circuit using a 12v regulator (for 5v you'd substitute with an LM7805): | Heres a summary of the circuit using a 12v regulator (for 5v you'd substitute with an LM7805): | ||
Revision as of 18:25, 21 December 2015
Covkid:
These days, we run laptops and other items that need a smoother or even reduced supply compared to the nominal 12.5V supply, and if the engine is running, the voltage can reach 14v. A raw supply is fine for some items but most modern electronics require a bit more precision than this. For instance, the dash clocks in a T25 use a fixed 10v regulated supply for part of the circuit and this is achieved by a voltage regulator fixed to the back of the clocks rated at 10v.
Relatively cheap, voltage regulators have three legs and in various sizes including but not limited to:
LM7805 (5v) LM7809 (9v) LM7812 (12v)
With the addition of a few capacitors to further smooth out the supply, you can build a simple and effective power source at one or more voltage levels. They're cheap and easy to build and a whole lot less than ones you can buy - even on ebay. Check the amp rating will be suitable for your appliance.
Heres a summary of the circuit using a 12v regulator (for 5v you'd substitute with an LM7805):
'Input' refers to red wire from battery or other dash 12v power lead, 'output' to the item that needs the fixed supply. Earth (chassis) is common to both. I recently purchased a 12v notebook to make things simpler in the camper - no need for voltage increasers, and three components provide a perfect power source.
A great video explaining the principles can be found here:
