Steering and suspension power steering - Revision history

Hacksawbob at 22:30, 29 June 2012

2012-06-29T22:30:26Z

← Older revision		Revision as of 22:30, 29 June 2012
Line 6:		Line 6:
	'''Replacing power steering filter'''		'''Replacing power steering filter'''

	'''Aidan''' you can just fish it out of the reservoir but I'd change the fluid if possible, if you remove the rubber joint in the middle of the low pressure pipe under the van it'll drain there, follow the instructions in Bentley for refilling, pretty simple system really just extremely high pressure on the high pressure side 120bar		'''Aidan''' (there is a doughnut shaped hard filter at the bottom of the power steering fluid reservoir) you can just fish it out of the reservoir but I'd change the fluid if possible, if you remove the rubber joint in the middle of the low pressure pipe under the van it'll drain there, follow the instructions in Bentley for refilling, pretty simple system really just extremely high pressure on the high pressure side 120bar
	the rubber pipe is a non standard size, I have it in stock, standard 1/2" hydraulic hose leaks cos VW use 12mm of course and that .27mm makes all the difference, eh girls		the rubber pipe is a non standard size, I have it in stock, standard 1/2" hydraulic hose leaks cos VW use 12mm of course and that .27mm makes all the difference, eh girls

Hacksawbob at 22:26, 29 June 2012

2012-06-29T22:26:36Z

← Older revision		Revision as of 22:26, 29 June 2012
Line 4:		Line 4:


	[[Replacing power steering filter]]		'''Replacing power steering filter'''

	'''Aidan''' you can just fish it out of the reservoir but I'd change the fluid if possible, if you remove the rubber joint in the middle of the low pressure pipe under the van it'll drain there, follow the instructions in Bentley for refilling, pretty simple system really just extremely high pressure on the high pressure side 120bar		'''Aidan''' you can just fish it out of the reservoir but I'd change the fluid if possible, if you remove the rubber joint in the middle of the low pressure pipe under the van it'll drain there, follow the instructions in Bentley for refilling, pretty simple system really just extremely high pressure on the high pressure side 120bar
	the rubber pipe is a non standard size, I have it in stock, standard 1/2" hydraulic hose leaks cos VW use 12mm of course and that .27mm makes all the difference, eh girls		the rubber pipe is a non standard size, I have it in stock, standard 1/2" hydraulic hose leaks cos VW use 12mm of course and that .27mm makes all the difference, eh girls

Hacksawbob at 22:26, 29 June 2012

2012-06-29T22:26:17Z

← Older revision		Revision as of 22:26, 29 June 2012
Line 2:		Line 2:

	'''Bigherb''' Yep T3's use ATF Dexron 2 or Dexron 3		'''Bigherb''' Yep T3's use ATF Dexron 2 or Dexron 3


			[[Replacing power steering filter]]

			'''Aidan''' you can just fish it out of the reservoir but I'd change the fluid if possible, if you remove the rubber joint in the middle of the low pressure pipe under the van it'll drain there, follow the instructions in Bentley for refilling, pretty simple system really just extremely high pressure on the high pressure side 120bar
			the rubber pipe is a non standard size, I have it in stock, standard 1/2" hydraulic hose leaks cos VW use 12mm of course and that .27mm makes all the difference, eh girls

Hacksawbob: Created page with ''''Simon Baxter''' If the cap is green on the reservoir, then use hydraulic fluid, if it is red then use ATF. T3's are ATF generally. '''Bigherb''' Yep T3's use ATF Dexron 2 or …'

2010-05-16T08:30:56Z

Created page with ''''Simon Baxter''' If the cap is green on the reservoir, then use hydraulic fluid, if it is red then use ATF. T3's are ATF generally. '''Bigherb''' Yep T3's use ATF Dexron 2 or …'

New page

'''Simon Baxter''' If the cap is green on the reservoir, then use hydraulic fluid, if it is red then use ATF. T3's are ATF generally.

'''Bigherb''' Yep T3's use ATF Dexron 2 or Dexron 3