i foolishly moved the splined spindle on the injection pump on a SB gtd engine i have just fitted to my syncro, the engine runs and ticks over, but i took it for a test drive and i feel i am only getting part throttle. Also i cant here the turbo spool up, is the a set up procedure or does someone have the knowledge to help me.
cheers
eltee
setting the throttle lever SB gtd
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 106
- Joined: 22 Aug 2009, 11:19
- 80-90 Mem No: 8417
- Location: Falkirk Scotland
setting the throttle lever SB gtd
91 syncro ex bundeswehr
Re: setting the throttle lever SB gtd
undo nut at top of throttle shaft and JUST slide up the throttle arm so it clears the spines. With a pair of small needle nose pliers etc gently hold onto the top of the spindle and rotate it anticlockwise.
Do it one notch at a time. You will be able to tell quite easily when you have it bob on , will obviously idle spot on and start to pick up as soon as your off the stop.
Do it one notch at a time. You will be able to tell quite easily when you have it bob on , will obviously idle spot on and start to pick up as soon as your off the stop.