droopy Caravelle armrest

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
weimarbus
Registered user
Posts: 808
Joined: 19 Jun 2010, 12:53
80-90 Mem No: 10165
Location: coulsdon

droopy Caravelle armrest

Post by weimarbus »

Good morning to all, does anyone have an exploded image or pictures of the inside mechanism of a Caravelle armrest, mine has developed brewers droop suddenly. I did find some info via 'Samba' but no diagrams, it may well be obvious when apart but I just thought it would be useful to be pre warned. Many thanks.
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw  Madison kit

shepster
Registered user
Posts: 1673
Joined: 12 Oct 2005, 11:14
80-90 Mem No: 1342
Location: Wolverhampton.

Re: droopy Caravelle armrest

Post by shepster »

Has the 'roll pin' that holds the arm to the seat bracket come out?

Sometimes the pins holding the bracket to the seat come loose or actually fall out.

Another problem is if the adjuster is fully unscrewed and can pull out of the arm, there's a 'captive ' nut inside the arm that rattles around which will require a bit of surgery to the arm if this is the case.
2.1 DJ running on carb and LPG.

weimarbus
Registered user
Posts: 808
Joined: 19 Jun 2010, 12:53
80-90 Mem No: 10165
Location: coulsdon

Re: droopy Caravelle armrest

Post by weimarbus »

:ok Thank you Shepster, panic over, was aware of the roll pin but it hadn't occurred to me that it may have come out, now I wonder where it has gone, parked against fence so will look when rain stops :D
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw  Madison kit

multisi
Registered user
Posts: 1731
Joined: 03 Apr 2016, 12:01
80-90 Mem No: 12
Location: jersey

Re: droopy Caravelle armrest

Post by multisi »

The metal part that the pin goes through can crack open, i repaired mine with a thick steel sleeve  with a hole drilled out and fitted over the broken part.
1992 red lle 2.2 subaru 1990 rhd caravelle 2.2 subaru 1986 california import vanagon

weimarbus
Registered user
Posts: 808
Joined: 19 Jun 2010, 12:53
80-90 Mem No: 10165
Location: coulsdon

Re: droopy Caravelle armrest

Post by weimarbus »

thanks will check later :ok
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw  Madison kit

weimarbus
Registered user
Posts: 808
Joined: 19 Jun 2010, 12:53
80-90 Mem No: 10165
Location: coulsdon

Re: droopy Caravelle armrest

Post by weimarbus »

Thank you for your help, the pin had come out and was in the cover of the arm rest, retensioned pin a little by wedging it open with a screwdriver and twisting and it is now fitted firmly :ok Did notice a slight exhaust blow when moving away from the fence , feared rthe worst when found the top bolt missing on the manifold by the waterpump but thread not stripped and new bolt tightened correctly and stopped blow, if only all things that go wrong were so easily fixed :lol:
1985 hi-top 2.1MV with DG carb and LPG
1955 trials buggy with 1.9 DG high lift cam and twin dell's (now sold)
1972 1303 beetle
1992 Audi 100 2.8 quattro estate
1967 Vw  Madison kit

Post Reply