hi i have upgraded my clocks as the pcb was knackered but now the oil light flashes just once where before it used to flash repeatedly until engine start up, its a 1.9 watercooled on a c reg 86 and the kit was from slaughter house customs anyone had this?? want to take trip soon but want to check its good to go with no issues.
pcb upgrade now oil light dont flash proper
Moderators: User administrators, Moderators
- Shinnster
- Registered user
- Posts: 212
- Joined: 17 Aug 2020, 14:19
- 80-90 Mem No: 17392
- Location: West London
- Contact:
Re: pcb upgrade now oil light dont flash proper
i have this same thing with my upgrade kit too (also from SHC). sometimes it does flash multiple times but 90% of the time it just flashes once and goes off.
it does still work though as when my Buzzer comes on the oil light is illuminated too.
has been this way for about 8 months since i fitted it
it does still work though as when my Buzzer comes on the oil light is illuminated too.
has been this way for about 8 months since i fitted it
1988 1.9 DG, 4 speed Tin top with double sliders.
Re: pcb upgrade now oil light dont flash proper
thats good to hear wanted to head down to Devon on the weekend but was worried wouldnt see if there was a problem until too late!! probably over worrying as first trip out. thanks for the reply
- Shinnster
- Registered user
- Posts: 212
- Joined: 17 Aug 2020, 14:19
- 80-90 Mem No: 17392
- Location: West London
- Contact:
Re: pcb upgrade now oil light dont flash proper
ive taken mine from west london to devon once and then to cornwall on another trip. Am no mechanical / electrical guy as i'm new to this all myself but it seems to be ok with the light going straight out:)
1988 1.9 DG, 4 speed Tin top with double sliders.
- AngeloEvs
- Registered user
- Posts: 1345
- Joined: 22 Nov 2007, 19:22
- 80-90 Mem No: 4709
- Location: Upwell, Norfolk
Re: pcb upgrade now oil light dont flash proper
Recently had a dash to repair with this fault following the SHC upgrade. There is a jumper that needs to be set depending on wether the van has the later DOPs System or the earlier simple oil pressure warning. The Jumper should be across pins 1 and 2 for late vans or pins 2 and 3 for early vans. Picture shows jumper in the correct position for late vans with DOPS.
1987 DG Karisma LPG with remodelled interior
- Shinnster
- Registered user
- Posts: 212
- Joined: 17 Aug 2020, 14:19
- 80-90 Mem No: 17392
- Location: West London
- Contact:
Re: pcb upgrade now oil light dont flash proper
ooh thats good to know! thanks
will have a check of mine over the weekend and see how mines set.
will have a check of mine over the weekend and see how mines set.
1988 1.9 DG, 4 speed Tin top with double sliders.
-
- Registered user
- Posts: 182
- Joined: 13 Dec 2013, 20:36
- 80-90 Mem No: 2434
- Location: Portsmouth
Re: pcb upgrade now oil light dont flash proper
I know an idiot that didn’t do this
- ajsimmo
- Trader
- Posts: 2701
- Joined: 23 Mar 2009, 14:06
- 80-90 Mem No: 6542
- Location: Isle of Arran
- Contact:
Re: pcb upgrade now oil light dont flash proper
southernscouse wrote:I know an idiot that didn’t do this
Anyone with issues following fitting the SHC kit, just give them a call. They're really helpful, and will sort you out.
Sent from my moto g(30) using Tapatalk
The Campershack - (website paused)
WBX Rebuilds & Upgrades from the beautiful Isle of Arran
WBX Rebuilds & Upgrades from the beautiful Isle of Arran
- Shinnster
- Registered user
- Posts: 212
- Joined: 17 Aug 2020, 14:19
- 80-90 Mem No: 17392
- Location: West London
- Contact:
Re: pcb upgrade now oil light dont flash proper
the settings has been changed on mine now and the light flashes as its meant to!
thanks Angelo!
thanks Angelo!
1988 1.9 DG, 4 speed Tin top with double sliders.