pcb upgrade now oil light dont flash proper

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
Brismike
Registered user
Posts: 9
Joined: 27 Aug 2019, 12:15
80-90 Mem No: 0

pcb upgrade now oil light dont flash proper

Post by Brismike »

hi i have upgraded my clocks as the pcb was knackered but now the oil light flashes just once where before it used to flash repeatedly until engine start up, its a 1.9 watercooled on a c reg 86 and the kit was from slaughter house customs anyone had this?? want to take trip soon but want to check its good to go with no issues.
 

User avatar
Shinnster
Registered user
Posts: 210
Joined: 17 Aug 2020, 14:19
80-90 Mem No: 17392
Location: West London
Contact:

Re: pcb upgrade now oil light dont flash proper

Post by Shinnster »

i have this same thing with my upgrade kit too (also from SHC). sometimes it does flash multiple times but 90% of the time it just flashes once and goes off.
it does still work though as when my Buzzer comes on the oil light is illuminated too.
has been this way for about 8 months since i fitted it
1988 1.9 DG, 4 speed Tin top with double sliders.

Brismike
Registered user
Posts: 9
Joined: 27 Aug 2019, 12:15
80-90 Mem No: 0

Re: pcb upgrade now oil light dont flash proper

Post by Brismike »

thats good to hear wanted to head down to Devon on the weekend but was worried wouldnt see if there was a problem until too late!! probably over worrying as first trip out. thanks for the reply 

User avatar
Shinnster
Registered user
Posts: 210
Joined: 17 Aug 2020, 14:19
80-90 Mem No: 17392
Location: West London
Contact:

Re: pcb upgrade now oil light dont flash proper

Post by Shinnster »

ive taken mine from west london to devon once and then to cornwall on another trip.  Am no mechanical / electrical guy as i'm new to this all myself but it seems to be ok with the light going straight out:)
 
1988 1.9 DG, 4 speed Tin top with double sliders.

User avatar
AngeloEvs
Registered user
Posts: 1345
Joined: 22 Nov 2007, 19:22
80-90 Mem No: 4709
Location: Upwell, Norfolk

Re: pcb upgrade now oil light dont flash proper

Post by AngeloEvs »

Recently had a dash to repair with this fault following the SHC upgrade.    There is a jumper that needs to be set depending on wether the van has the later DOPs System or the earlier simple oil pressure warning.    The Jumper should be across pins 1 and 2 for late vans or pins 2 and 3 for early vans.     Picture shows jumper in the correct position for late vans with DOPS.

Image
1987 DG Karisma LPG with remodelled interior

User avatar
Shinnster
Registered user
Posts: 210
Joined: 17 Aug 2020, 14:19
80-90 Mem No: 17392
Location: West London
Contact:

Re: pcb upgrade now oil light dont flash proper

Post by Shinnster »

ooh thats good to know! thanks
will have a check of mine over the weekend and see how mines set.
1988 1.9 DG, 4 speed Tin top with double sliders.

southernscouse
Registered user
Posts: 182
Joined: 13 Dec 2013, 20:36
80-90 Mem No: 2434
Location: Portsmouth

Re: pcb upgrade now oil light dont flash proper

Post by southernscouse »

I know an idiot that didn’t do this

User avatar
ajsimmo
Trader
Posts: 2698
Joined: 23 Mar 2009, 14:06
80-90 Mem No: 6542
Location: Isle of Arran
Contact:

Re: pcb upgrade now oil light dont flash proper

Post by ajsimmo »

southernscouse wrote:I know an idiot that didn’t do this
ImageImageImage

Anyone with issues following fitting the SHC kit, just give them a call. They're really helpful, and will sort you out.

Sent from my moto g(30) using Tapatalk

The Campershack - (website paused)
WBX Rebuilds & Upgrades from the beautiful Isle of Arran

User avatar
Shinnster
Registered user
Posts: 210
Joined: 17 Aug 2020, 14:19
80-90 Mem No: 17392
Location: West London
Contact:

Re: pcb upgrade now oil light dont flash proper

Post by Shinnster »

the settings has been changed on mine now and the light flashes as its meant to!
thanks Angelo!
1988 1.9 DG, 4 speed Tin top with double sliders.

Post Reply