Clock swop

Post by **southernscouse** » 24 Apr 2022, 10:29

Hi my dash foil is kaput so I ordered a slaughterhouse kit I have a spare clock set in a broken housing
My question is since I am using the rewire kit is it possible to swop my speedo for one with reset and my analog clock to the other housing is it possible to get the plastic glass which has the holes in from one to the other and how

Post by **Mocki** » 24 Apr 2022, 13:02

I fear that will end in tears from my previous experiences. Maybe better to drill a hole in the other glass .

Post by **AngeloEvs** » 24 Apr 2022, 19:42

I have removed the acrylic lenses but it’s a 50/50 gamble that it will part with the dash without breaking. I used a wedged shaped wooden block and tapped it out at the edges. The housings can be repaired and I have repaired some that most would bin. Happy to give some info regards rebuilding the casing if you want.

Post by **davidoft1** » 24 Apr 2022, 20:31

I have a spare pod and a spare drilled glass

Post by **southernscouse** » 25 Apr 2022, 10:08

Thanks for the replies David your the nearest I give you a call. Thanks

Club 80-90 Forums

Clock swop

Clock swop

Re: Clock swop

Re: Clock swop

Re: Clock swop

Re: Clock swop