Hi my sliding door is a poor fit and rough on the rollers.
should the bottom vertical roller be running in a groove/depression or should this be flat
the middle hinge is there a kit to overhaul it and a roller kit for top middle and bottom?
Sliding door rollers and hinge
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 179
- Joined: 21 Jun 2019, 20:56
- 80-90 Mem No: 16913
- Location: Weybridge
- Contact:
Sliding door rollers and hinge
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol:
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Sliding door rollers and hinge
lower runner panel is flat originally, deform under weight of door lack of lube, grinding paste action and rust from inside the sill, eventually bearing goes through the floor
-
- Registered user
- Posts: 588
- Joined: 10 Aug 2015, 06:50
- 80-90 Mem No: 14800
- Location: Peel, Isle of Man
Re: Sliding door rollers and hinge
Has anyone 'plated' this area with some thin steel as it looks an awkward area to cut out and weld in new steel??
1987 VW T25: Subaru EJ20 using RJES parts (If it was meant to go fast it wouldn't be brick shaped!)
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Sliding door rollers and hinge
I have plated mine with a piece of flat steel cut off a scrapper and glued/bonded on with tiger seal, it has worked for the last 12 months
-
- Registered user
- Posts: 296
- Joined: 08 Jul 2014, 09:23
- 80-90 Mem No: 13990
- Location: 10 miles south of Bristol
Re: Sliding door rollers and hinge
I cut a piece of 1.2 stainless steel to fit the flat area in the runner aperture. It took a bit of fiddling but it was worth it. I bonded it into place with ms polymer adhesive. Looks tidy and has made the door action smoother and quieter. Lasted ok for the last 4 years and no sign of wearing out.