Please excuse the basic question but Diesels are still black magic to me! Petrol makes so much more sense!
After lots of starting and running issue finally traced back to air leaks (I think) It now starts stops and drives fine. But....
The stop solenoid on the fuel pump does nothing when power is connected to it. It looks ceased. I presume it has been creatively engineered like the rest of the install. Despite this the engine runs very well.
My question is why does the engine stop when I turn off the ignition is there a valve somewhere else?
There is wiring and a relay to the old style fuel filter housing that I have yet to identify. Anyone?
1Y engine questions
Moderators: User administrators, Moderators
- Oldiebut goodie
- Registered user
- Posts: 7294
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: 1Y engine questions
Maybe not the stop solenoid then.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- ZsZ
- Registered user
- Posts: 1412
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: 1Y engine questions
The stop solenoid (#8 on the pic above) on the pump should make a small click when you touch the +ve onto the stud and another when you remove the power. If the engine runs and stops, then it is working correctly (or there is another shutoff solenoid somewhere inline the fuel lines).
The relay and wiring on the filter could be a prewarmer. Maybe PO ran on Waste Wegetable Oil (WVO). A pic would help to identify it.
The relay and wiring on the filter could be a prewarmer. Maybe PO ran on Waste Wegetable Oil (WVO). A pic would help to identify it.
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
- ajsimmo
- Trader
- Posts: 2701
- Joined: 23 Mar 2009, 14:06
- 80-90 Mem No: 6542
- Location: Isle of Arran
- Contact:
Re: 1Y engine questions
Are you sure you're not looking at a waxstat on the side of the pump? This is a cold start advance device, which won't click as it only has a heater element in it, and even when powered it wouldn't be apparent that it's doing anything.
Sent from my moto g(30) using Tapatalk
Sent from my moto g(30) using Tapatalk
The Campershack - (website paused)
WBX Rebuilds & Upgrades from the beautiful Isle of Arran
WBX Rebuilds & Upgrades from the beautiful Isle of Arran
Re: 1Y engine questions
The wax stat on the side for the advance seems to be working ok although it does not move far.
The stop solenoid has no visible movement or noise when removed and connected to power. As far as i can see there is nothing else in the fuel system. Is there an air shut off in the inlet somewhere to shut the engine down? or is it always fuel on VW's.
I have ordered a new fuel pump solenoid just in case. I am keen to learn as very few garages deal with anything this old round these parts.
The stop solenoid has no visible movement or noise when removed and connected to power. As far as i can see there is nothing else in the fuel system. Is there an air shut off in the inlet somewhere to shut the engine down? or is it always fuel on VW's.
I have ordered a new fuel pump solenoid just in case. I am keen to learn as very few garages deal with anything this old round these parts.
- ZsZ
- Registered user
- Posts: 1412
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: 1Y engine questions
It is always fuel on VWs.
The solenoid itself does not move. Just pulls a plunger inside the pump.
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
Re: 1Y engine questions
Ok thanks.
I am very confused by this as the solenoid is different internally to that one and there is a loose piston and return spring inside the pump. If anything the pin in the solenoid would push this further into the pump. But the pin does not move when the solenoid is removed and connected to power. Yet the engine stops instantly when I turn off the ignition.
I will return it to the factory setup as illustrated.
I am very confused by this as the solenoid is different internally to that one and there is a loose piston and return spring inside the pump. If anything the pin in the solenoid would push this further into the pump. But the pin does not move when the solenoid is removed and connected to power. Yet the engine stops instantly when I turn off the ignition.
I will return it to the factory setup as illustrated.