Hi All,
Is there a rule of thumb regarding the size difference between the glass and the opening for windows on a panel Van conversion. E.g. 10mm all round etc...
Does the type of seal used have an impact on the size difference?
My sliding door has been badly repaired at some point, the opening is still oversized so would be nice to repair to the correct size.
Thanks.
Side window aperture sizing
Moderators: User administrators, Moderators
- BigBlueVan
- Registered user
- Posts: 137
- Joined: 21 Dec 2020, 20:45
- 80-90 Mem No: 0
Re: Side window aperture sizing
7mm is about the standard gap between panel and glass l seem to recall.
So a 200mm by 100mm piece of glass requires a hole 214mm by 114mm.
Claytonrite seals with rubber beading are mostly used. Approx. 1.6mm metal. 5mm glass. 7mm web.
Speak to Sealsdirect.
https://sealsdirect.co.uk/
So a 200mm by 100mm piece of glass requires a hole 214mm by 114mm.
Claytonrite seals with rubber beading are mostly used. Approx. 1.6mm metal. 5mm glass. 7mm web.
Speak to Sealsdirect.
https://sealsdirect.co.uk/
MaxStu
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
1989 DJ 2.1 Auto Leisuredrive rusty bucket.
1987 DG1.9 LPG Auto Autosleeper
"Blissfully happy in your presence".
- BigBlueVan
- Registered user
- Posts: 137
- Joined: 21 Dec 2020, 20:45
- 80-90 Mem No: 0
Re: Side window aperture sizing
Thanks for that,, their website explained everything i need.
cheers.
cheers.