Apk gen v git
Moderators: User administrators, Moderators
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Apk gen v git
Hi all fitting a mk4 golf gti engine at 50 degrees.also converting the manual to an auto
Always worth asking vw (tps) for the cost of parts. Cam belt. Tenshioner Water pump. Spark plugs inlet manifold gaskit.dip stick funnel were all cheaper than I could get them at euro car parts. Oddly tps wanted £30 for the thermostat and £5 for the oring sealwhich is outrageous. So I source one elsewhere.
Always worth asking vw (tps) for the cost of parts. Cam belt. Tenshioner Water pump. Spark plugs inlet manifold gaskit.dip stick funnel were all cheaper than I could get them at euro car parts. Oddly tps wanted £30 for the thermostat and £5 for the oring sealwhich is outrageous. So I source one elsewhere.
Back in the game with an uncut 2wd panel van
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
The engine has a good service history but I am replacing all the serviceable parts now as its easy on the stand. The water pump is driven from the cam belt.on the 06a engines and I don't think its ever been changed.
The impeller was incredibly brittle after 20years
The impeller was incredibly brittle after 20years
Back in the game with an uncut 2wd panel van
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
Thermostat dose not fair much better i think the engine may have been run with water in the cooing system at some point.
Back in the game with an uncut 2wd panel van
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
Cam belt water pump tenshioner thermostat all replaced.
The rocker cover gaskt was show signs weaping this involved the removal of the inlet manifold as it snakes over the top of it to remove the rocker cover. I decreased the rocker cover and the baffle before re fitting.
The rocker cover gaskt was show signs weaping this involved the removal of the inlet manifold as it snakes over the top of it to remove the rocker cover. I decreased the rocker cover and the baffle before re fitting.
Back in the game with an uncut 2wd panel van
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
All rebuilt and all service items now replaced apart from the sump whichi will fit soon. Interestingly the 15degree sump and the 50 degree sump are not a million miles apart. The 50 degree one is a work of art.
Back in the game with an uncut 2wd panel van
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
Did I quick mock up of the engine cradle and engine bars and exhaust down pipe.
Back in the game with an uncut 2wd panel van
- rollercoaster
- Registered user
- Posts: 897
- Joined: 10 Dec 2008, 20:30
- 80-90 Mem No: 6231
- Location: Carmarthenshire Ceridigion border
Re: Apk gen v git
Yay I was hoping to ask you how its going!
Live as if you were to die tomorrow
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
Learn as if you were to live forever
Syncro Danbury 2.0 petrol AGG
-
- Trader
- Posts: 16342
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Apk gen v git
I gasped when I saw that sump. There's a lot of high speed CNC milling going on there to carve those out.
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
Couple more pics of the oil pump pickup adapter and the sump dry fitted
Back in the game with an uncut 2wd panel van
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
So its been a while and a learning curve. Manual to auto conversion . Complete suspension rebuild. New trailing arms. 2 auto boxes as the first was shageged . I am hoping to have the first test drive tomorrow after work.
.
Back in the game with an uncut 2wd panel van
-
- Trader
- Posts: 16342
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Apk gen v git
Nice job Neil, whats the ground clearance going to be like? I believe the H&R Cup Kit came off ££££
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
Passed the mot today so that's another box ticked and the owner is coming to pick it up on the weekend. I have to say my head has been turned by the auto box. It makes for a very relaxing drive. The engine is nice and quiet just doing it's thing maintaining good coolent temps confirmed buy the obdw reader. I had to introduce a 27ohm resistor to the temp gauge circuit so that the dash gauge performed normally as I am using the APK temp sender for the ECU and the dash gauge.
The h&r springs and koni shocks have been replaced for bw avo -50mm kit as comfort was a priority for the owner and we felt the h&r would be just to sporty for his needs. I have to complement bw on this set up as if feels planted but very comfortable. The ground clearance at the lowest point is 150mm that's the diff on the gear box (bulges on an auto box) and the tail end of the sump.
Neil
The h&r springs and koni shocks have been replaced for bw avo -50mm kit as comfort was a priority for the owner and we felt the h&r would be just to sporty for his needs. I have to complement bw on this set up as if feels planted but very comfortable. The ground clearance at the lowest point is 150mm that's the diff on the gear box (bulges on an auto box) and the tail end of the sump.
Neil
Back in the game with an uncut 2wd panel van
-
- Trader
- Posts: 16342
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Apk gen v git
I still love those Carrera wheels on that bus.
Glad that it went to someone who had their own vision for it.
Glad that it went to someone who had their own vision for it.
-
- Registered user
- Posts: 577
- Joined: 21 Feb 2010, 20:50
- 80-90 Mem No: 17450
- Location: Derbyshire
Re: Apk gen v git
I keep banging on about this, but an auto box in these vans absolutely transforms it. My 2.1 Auto caravelle was faster, smoother, quieter at speed and hugely more pleasant than all the manual (AAP 5 speed or whatever) vans I've had. It's no sports car and an auto box is just there ready to drop a cog when required on hills etc. Absolutely joyous, I really do regret selling that van.
Let's not mention the MPG though.
- axeman
- Registered user
- Posts: 1237
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: Apk gen v git
I am not overly concerned about the mpg. Recently we did a 1000km trip on our westy.agg Very low geared gear box. And it still returned late 20s which I find more than acceptable. The engine is the next generation from the agg so I would assume more efficient. If it actives mid to late 20s with the auto that has to be a very happy compromise. I am optimistic.
Back in the game with an uncut 2wd panel van