Seat hinge cover (no idea really) needed.

[Swebby]

OK I have no idea what to call it but have had a long search on Brickwerks and cannot find it. It fits over the bit on the seats where they hinge. I have put a photo of what it looks like next to the one I am missing.
Any pointers and I would be grateful.

Sean

Sent from my BBB100-2 using Tapatalk

[Swebby]

Going to answer my own question, trawled through lots of Google images till I found one.
It is a Front Seat Joint Cover, nlavw sell them if anyone else is missing one.

Sent from my BBB100-2 using Tapatalk

[itchyfeet]

Took mine off because they keep falling off which is why so many are missing, looks fine without one.

[Swebby]

Took mine off because they keep falling off which is why so many are missing, looks fine without one.

True but I was buying a few odds and ends like bolt covers etc and thought why not.

Sent from my BBB100-2 using Tapatalk

[itchyfeet]

thought why not.

Because it will fall off again but your choice.

[R0B]

My covers have never fallen off.

[multisi]

The hinge covers are available again as a reproduction part , left and right differ in design and they don't just fall off unless they are damaged, sometimes by the way they are removed.

[Glenn2018]

Try Serial Kombi .REF 221881477 for the left side . Fits well .They also do a right one although we did not need one

[George22]

Hi

I have the same problem (along with lots of other elderly fragile plastic bits that have fallen off our Vanagon). There are usually most of these bits on the samba website- some sellers will post to the UK

[300CE]

https://www.brickwerks.co.uk/hinge-cove ... black.html" onclick="window.open(this.href);return false;

https://www.brickwerks.co.uk/hinge-cove ... black.html" onclick="window.open(this.href);return false;