Herman's welding and paint job...after years of planning
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 371
- Joined: 14 Nov 2007, 21:28
- 80-90 Mem No: 4088
- Location: Seaton Carew, Cleveland
Re: Herman's welding and paint job...after years of planning
Looking good Marcus!
It's not the sort of colour that I was expecting when you first mentioned it. Will be good to see the two blends revealed. Need some shinney new alloys now!
It's not the sort of colour that I was expecting when you first mentioned it. Will be good to see the two blends revealed. Need some shinney new alloys now!
T25 Tintop homebrew interior
1.9 DG late engine
1.9 DG late engine
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Herman's welding and paint job...after years of planning
Hi Mark,
Yep the colour is a weird one, it will look darker indoors, almost a slate grey...but in the light it should be almost a primer grey/blue. It's quite a unique colour which is why I picked it. In terms of the wheels, I have a plan...all should be revealed in final photos
We will have to have a run out so I can show the van off at some point, with all the salt on the roads it may have to be up my neck of the woods. Drove to teeside with work today on A19 and car was black...only washed Sunday !
Yep the colour is a weird one, it will look darker indoors, almost a slate grey...but in the light it should be almost a primer grey/blue. It's quite a unique colour which is why I picked it. In terms of the wheels, I have a plan...all should be revealed in final photos
We will have to have a run out so I can show the van off at some point, with all the salt on the roads it may have to be up my neck of the woods. Drove to teeside with work today on A19 and car was black...only washed Sunday !
-
- Registered user
- Posts: 2531
- Joined: 16 Aug 2012, 13:05
- 80-90 Mem No: 12017
- Location: Sidcup, Kent
Re: Herman's welding and paint job...after years of planning
Looking smart there VDub - bet you can't wait to get it back!
'86 DG, Weber Carb
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Herman's welding and paint job...after years of planning
Thank you 300 CE, yes I am ridiculously excited. Waited along time for this so can't wait to pick up Saturday!
-
- Registered user
- Posts: 371
- Joined: 14 Nov 2007, 21:28
- 80-90 Mem No: 4088
- Location: Seaton Carew, Cleveland
Re: Herman's welding and paint job...after years of planning
Like the look Marcus.
Now needs a run out to Jeffs for fish n chips, then Springdub and Mightydubfest etc etc
Must get mine sorted.
Now needs a run out to Jeffs for fish n chips, then Springdub and Mightydubfest etc etc
Must get mine sorted.
T25 Tintop homebrew interior
1.9 DG late engine
1.9 DG late engine
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Herman's welding and paint job...after years of planning
Hi Mark,
No problem there, plenty of run outs planned. Going to do the swanage 80-90 meet in Dorset at Easter, camperjam, dubfest...will look into spring dub but think it may be my birthday weekend and I have plans.
I am up for a run out to Saltburn, could maybe do next weekend potentially on way back from collecting the van...will have to wait until dates are confirmed etc. I was going to collect tomorrow but the van is going to go to Gasure for a few extra mods instead.
Cheers
Marcus
No problem there, plenty of run outs planned. Going to do the swanage 80-90 meet in Dorset at Easter, camperjam, dubfest...will look into spring dub but think it may be my birthday weekend and I have plans.
I am up for a run out to Saltburn, could maybe do next weekend potentially on way back from collecting the van...will have to wait until dates are confirmed etc. I was going to collect tomorrow but the van is going to go to Gasure for a few extra mods instead.
Cheers
Marcus
Re: Herman's welding and paint job...after years of planning
Vdub89 wrote:Hi David,
Yes they are just round the corner from Gasure. Steve has been brilliant actually at Gasure, he has used them a fair bit over the years and suggested I gave them a go. He was right, very happy so far!
When I dropped my van off they had just finished a bay window and that looked good, plus they were on with another T 25.
Do you have contact details?
cant find them on google and looking to get my van painted too.
cheers,
Garry
1983 1.9DG Petrol (4 Speed) T25 Leisuredrive High Top
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Herman's welding and paint job...after years of planning
Hi Gary,
Yes sure the guy is called Kevin, his number is 07535 131999. I mentioned I would be putting photos on the forum so he won't mind calls to his mobile. They work Saturdays till lunchtime.
Cheers
Marcus
Yes sure the guy is called Kevin, his number is 07535 131999. I mentioned I would be putting photos on the forum so he won't mind calls to his mobile. They work Saturdays till lunchtime.
Cheers
Marcus
-
- Registered user
- Posts: 61
- Joined: 01 Jul 2012, 17:53
- 80-90 Mem No: 11280
- Location: Skelton, North Yorks
- Contact:
Re: Herman's welding and paint job...after years of planning
Marcus
Its looking good.
Its looking good.
Jeff
1979 Bays Westfalia x 2 & Devon
1973 Beetle 1303
1961 Chevrolet Corvair 95 Pick Up
1979 Bays Westfalia x 2 & Devon
1973 Beetle 1303
1961 Chevrolet Corvair 95 Pick Up
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Herman's welding and paint job...after years of planning
Thanks Jeff,
I am really happy with it, wish I was collecting it today, but good things come to those who wait...so will have it back next week.
Don't suppose you or anyone else knows where to get the little black strip on the top of sliding door cover from? It was brittle and cracked when came off, the only casualty but I imagine it is like the gutter trims and quite hard to find?
Jeff we will have a run down to show you the van soon
Cheers
Marcus
I am really happy with it, wish I was collecting it today, but good things come to those who wait...so will have it back next week.
Don't suppose you or anyone else knows where to get the little black strip on the top of sliding door cover from? It was brittle and cracked when came off, the only casualty but I imagine it is like the gutter trims and quite hard to find?
Jeff we will have a run down to show you the van soon
Cheers
Marcus
- keytouch
- Registered user
- Posts: 952
- Joined: 17 Oct 2007, 22:31
- 80-90 Mem No: 4484
- Location: West Somerset
Re: Herman's welding and paint job...after years of planning
Like this?
https://www.vwheritage.com/shop/2818437 ... bClassic=1" onclick="window.open(this.href);return false;
https://www.vwheritage.com/shop/2818437 ... bClassic=1" onclick="window.open(this.href);return false;
Jonathan
A Camper called Wanda
1983 A reg Bilbo Marlfield conversion, 1900 Diesel 1Y engine
A Camper called Wanda
1983 A reg Bilbo Marlfield conversion, 1900 Diesel 1Y engine
- Dazco
- Registered user
- Posts: 2299
- Joined: 18 Dec 2011, 15:44
- 80-90 Mem No: 10544
- Location: Sheffield. 1984 autosleeper trooper. 1.9 petrol called Jambo
Re: Herman's welding and paint job...after years of planning
Looking realy good , like the colours
Auto sleeper fitted with EJ 20 subaru lump
-
- Registered user
- Posts: 141
- Joined: 20 Nov 2008, 18:51
- 80-90 Mem No: 6123
- Location: Newcastle upon Tyne
Re: Herman's welding and paint job...after years of planning
Ahh yes that's it...thank you very much!