I managed to clean up and refit the roof, not quite so easy to lift it back into place but managed in the end. Very pleased with the snug fit I managed to achieve.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps9da76c4d.jpg)
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zpsd9d9d81f.jpg)
Insulation in the form of foil backed bubble wrap stuck into place with high temperature spray glue.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zpsabd05a33.jpg)
Then the window surrounds were cut back to good steel. I managed to find a steel supplier who would cut steel into strips ready to weld.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zpsfc354051.jpg)
So cardboard templates cut for all the repair patches made and checked for fit.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps71fdde05.jpg)
Managed to bag a set of tasty alloy wheels and managed to get them machined by an ex 'A' level student, now a qualified Tool Maker.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps69350b82.jpg)
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zpsaf92cf75.jpg)
They do need refurbishing so that is now an ongoing mini project.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps0de502d0.jpg)
this shows checking the front wheel fit over the grease cap.
Best news of now, is that I've bought myself a mig welder as I was unable to borrow the set I used to use at College.
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps3692df82.jpg)
So today.....
passengers foot step replaced
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps84fa9d69.jpg)
wheel arch by passengers seatbelt mount
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zpse49b4637.jpg)
window surrounds on ns replaced
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps9f75d7e5.jpg)
![Image](http://i1323.photobucket.com/albums/u591/Woodyyellow/null_zps8f27d976.jpg)
and a few other small areas all on the same side done.
Tomorrow should see the os work done. Very pleased with progress.