Oil breather location....

[The Bobdogs]

OK, Despite not having a clue what I'm doing I'm having a go at fitting my dellorto carbs.....so far so good, one is in place and I think I've worked out what goes where....

I need to fit the oil breather, so , where abouts on the rocker cover do I drill to fit the pipe connector? Top...bottom...middle...does it matter?

Where does the shiny metal box that all the pipes connect to need to live? Is the location important or is it just a case of where is convenient to mount it?

Any advice welcome....

[keith2]

Hi Bobdogs

I fitted Dellortos to my 2.0CU last year to replace the knackered Solexs, they are brilliant. Cant help with the oil breather though, as I have just left the pipe open pointoing towards the back of the engine bay, do intend to fit a small filter at some point but does not seem to throw out very much oil at all.

Good luck finishing off the install, and look forward to the improvement

[dazwatson]

The oil pipe goes into the top of the rocker cover.

I placed my oil breather box at the back of the engine bay, I then just cut a small section of the tinware seal to locate the pipe through:
[/URL]

[The Bobdogs]

Thank you for the replies....
Good pic Daz, told me exactly what I wanted to know.

[kevtherev]

The oil pipe goes into the top of the rocker cover.

I placed my oil breather box at the back of the engine bay, I then just cut a small section of the tinware seal to locate the pipe through:
[/URL]

Shiney...does it work yet?

[dazwatson]

The oil pipe goes into the top of the rocker cover.

I placed my oil breather box at the back of the engine bay, I then just cut a small section of the tinware seal to locate the pipe through:
[/URL]

Shiney...does it work yet?

All good mate, Shep will tell you all about it.....Axel nut award to Dazwatson

[Ian Hulley]

Shep will tell you all about it.....Axel Knut award to Dazwatson

*sniggers*

[The Bobdogs]

Busy little day.....this lot is untested but looks alright!

[dazwatson]

Busy little day.....this lot is untested but looks alright!

Looking good, bet you can't wait to fire her up!!

[The Bobdogs]

Tried to yesterday but the bloody battery was flat from having some tunes on whilst working! Next weekend will be the first time I get to run it up....

[ccarpenter79]

Hey fellas,

I'm in the process of doing the dell job......is this the bugpack breather box?

http://www.coolairvw.co.uk/Item/Shop_by ... r_Kit.html" onclick="window.open(this.href);return false;

Is this the empi version and is it any different?!

http://www.ebay.co.uk/itm/VW-EMPI-Engin ... 2578e38f78" onclick="window.open(this.href);return false;

Without having the camper close to me to have look where do the pipes attach? I gather its into the rocker covers but are the connection already there?

Thanks.

[shepster]

Hey fellas,

I'm in the process of doing the dell job......is this the bugpack breather box?

http://www.coolairvw.co.uk/Item/Shop_by ... r_Kit.html" onclick="window.open(this.href);return false;

Is this the empi version and is it any different?!

http://www.ebay.co.uk/itm/VW-EMPI-Engin ... 2578e38f78" onclick="window.open(this.href);return false;

Without having the camper close to me to have look where do the pipes attach? I gather its into the rocker covers but are the connection already there?

Thanks.

No chap, you need to drill them and fit the outlets that come included in the kit, both look like they will do the job to me.