Hi all. I am thinking of getting a Holdsworth Pop Top for my Bertha Bus. What I need to know is how are they fitted? I will have to remove the roof from a doner a fair distance away. What tools will I need and what pit falls lie ahead? Also any idea what the going rate is for a dirty but working Holdsworth roof.
Thanks Steve
Holdsworth Pop Top
Moderators: User administrators, Moderators
-
SteveW
- Registered user
- Posts: 166
- Joined: 29 Nov 2005, 14:32
- 80-90 Mem No: 2760
- Location: Herts England, Member 2760
Holdsworth Pop Top
Never enough time
-
DiscoDave
- Registered user
- Posts: 3651
- Joined: 07 Oct 2005, 21:25
- 80-90 Mem No: 684
- Location: Harrogate North Yorkshire.
- Contact:
just had a look at asda's site £1.47 for 24
look for a devon roof instead, but if your set on the holdworth, for the removal, lots of blades and a stanley knife, drill and drill bits various sizes, screwdrivers, and a load of mates to lift cos it's damn heavey!!! cut the seal around the outside undo any fixings, drill any rivets out., fitting is the reversal of removal!! good luck![/img]
look for a devon roof instead, but if your set on the holdworth, for the removal, lots of blades and a stanley knife, drill and drill bits various sizes, screwdrivers, and a load of mates to lift cos it's damn heavey!!! cut the seal around the outside undo any fixings, drill any rivets out., fitting is the reversal of removal!! good luck![/img]
-
Flibbertigibbet
- Registered user
- Posts: 5077
- Joined: 02 Oct 2005, 08:17
- 80-90 Mem No: 1080
- Location: Brighton
