PAS

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

PAS

Post by R0B »

Has anyone replaced the seals in a power steering rack? Is it an easy or difficult job?
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
Aidan
Trader
Posts: 7402
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )

Re: PAS

Post by Aidan »

There's a thread on Syncro a few years ago, but I'd just send it to a little specialist in the South West and have them do the job, easy it is not.
AIDAN :)

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: PAS

Post by R0B »

Thanks mate. I had a quote of £250 from one company and wondered if a DIY was possible.
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
Aidan
Trader
Posts: 7402
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )

Re: PAS

Post by Aidan »

KELLY BRAY STEERING is the company I was meaning - did one for me back in 2022. The company I used before in the West Midlands ceased trading during covid
I asked Baxter and he'd never found a long term repeatable reliable company hence not supplying them on exchange, apart from the problems of peeps not sending cores or cores being beyond repair
AIDAN :)

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: PAS

Post by R0B »

Thanks. I have sent them a message.
:ok
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
T3luestar
Registered user
Posts: 671
Joined: 07 May 2012, 10:31
80-90 Mem No: 13845
Location: Widnes

Re: PAS

Post by T3luestar »

Just reviving this thread, as my power steering rack has developed a leak and filling the gator with fluid. Did you manage to get yours refurbished and by who?

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: PAS

Post by R0B »

I never got it done, it's a spare one I bought and was asking in case it needed refurbishing at some point.
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
T3luestar
Registered user
Posts: 671
Joined: 07 May 2012, 10:31
80-90 Mem No: 13845
Location: Widnes

Re: PAS

Post by T3luestar »

Cheers for the reply. 🤙

User avatar
clift_d
Registered user
Posts: 3479
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

Re: PAS

Post by clift_d »

We had our rack refurbished at Kiley & Clinton in Birmingham on the basis of multiple recommendations. I can’t comment on how it’s performed yet as we’re finally having it fitted to our van next week, but they were very professional to deal with.
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: PAS

Post by R0B »

How much did it cost Daniel?
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

silverbullet
Trader
Posts: 17684
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: PAS

Post by silverbullet »

clift_d wrote: 08 Aug 2026, 14:23 We had our rack refurbished at Kiley & Clinton in Birmingham on the basis of multiple recommendations. I can’t comment on how it’s performed yet as we’re finally having it fitted to our van next week, but they were very professional to deal with.

K&C are a proper firm, been around since forever, I wouldn't hesitate to go there.

The thing that kills PAS racks is dirty working practices when renewing pumps and hoses. Grit gets into the system on the wrong aude of the filter i the reservoir and then scores the piston tube.
1985 Oettinger 3.2 wbx-6 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 alloys,
"Schrödinger's syncro"
Syncronaut #156

silverbullet
Trader
Posts: 17684
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: PAS

Post by silverbullet »

R0B wrote: 08 Aug 2026, 14:27 How much did it cost Cliff?

Daniel :wink:
1985 Oettinger 3.2 wbx-6 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 alloys,
"Schrödinger's syncro"
Syncronaut #156

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: PAS

Post by R0B »

Edited
 
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
clift_d
Registered user
Posts: 3479
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

Re: PAS

Post by clift_d »

My recollection is that it was around £250-£300, but that was a couple of years back. No harm in giving them a call. They obviously require a unit to rebuild, and they’ll assess it thoroughly for suitability before they start.
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

User avatar
R0B
Moderator
Posts: 19833
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: PAS

Post by R0B »

:ok
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

Post Reply