CS 1.6D cam belt change tools?

[Paul7502]

Hi, I am looking to change the cam belt on my 1.6D CS T25.

I have just watched a Utube vid which says I need a locking tool for the crank, a locating pin thingi for the injector pump and a locking device for the cam.
I should think I could use a file or something for the slot on the cam but not sure of the crank and pump tools.

Do I need a special kit or can I get away with using some other method?

There is a new belt and tensioner on eBay for a reasonable £45 but no complete kit.

Advice appreciated before I buy the belt only to find out i have got to buy the tools which perhaps come with a belt.

I cant find a complete kit online.

Thanks.

[davidoft1]

Drill bit for the pump
Flat plate , spanner file etc for the cam

There’s a pointer on the crank , no
Tool

[Paul7502]

OK thanks I will get the cam belt on eBay.

Very useful forum, I only come here when I want something

Thank you.

[Simon Baxter]

All you need to swap a belt
https://brickwerks.co.uk/product/tool-v ... cking-set/

But, good practice to check the pump timing too, then you need to spend more money.
https://brickwerks.co.uk/product/tool-b ... iming-kit/