No output from Alternator to rev counter
Moderators: User administrators, Moderators
No output from Alternator to rev counter
Been struggling with this one for a while .Had the alternator re-conditioned before we went off on holiday hooked it up no output to the rev counter ,at this point too late to get a new one . Easy solution I’ll buy a new one but unfortunately a JX 90 amp doesn’t fit a 1Y engine has been fitted with a modified bracket for the alternator ,anyone seen this before there is no code on the alternator to identify it all I know is it’s a Bosch .
Westfalia(1990) lhd 1Y
Re: No output from Alternator to rev counter
Sent from my iPhone using Tapatalk
Westfalia(1990) lhd 1Y
Re: No output from Alternator to rev counter
Sent from my iPhone using Tapatalk
Westfalia(1990) lhd 1Y
- DoubleOSeven
- Registered user
- Posts: 2494
- Joined: 25 Jul 2014, 21:10
- 80-90 Mem No: 14520
- Location: Reading, England
- Contact:
Re: No output from Alternator to rev counter
My rev counter is fed from the negative pin on the coil. Not sure what the alternator has to with that signal. Could be a workaround for you though.
1990 Volkswagen Transporter 2.1 Manual
2005 Porsche 911 3.6 Manual
2012 Volkswagen Polo 1.4 Automatic
2005 Porsche 911 3.6 Manual
2012 Volkswagen Polo 1.4 Automatic
-
- Registered user
- Posts: 599
- Joined: 21 Feb 2010, 20:50
- 80-90 Mem No: 17450
- Location: Derbyshire
Re: No output from Alternator to rev counter
DoubleOSeven wrote: ↑18 Dec 2023, 12:11 My rev counter is fed from the negative pin on the coil. Not sure what the alternator has to with that signal. Could be a workaround for you though.
No coil on a diesel They use a tapping from one of the windings in the alternator for a tacho signal.