If its got an undiagnosed weepy barrel seal it may have rusted the bore and seized a piston.
You should be able to pull a DG over or at least rock it by hand with the plugs in.
Good luck.
Crank shaft not shifting
Moderators: User administrators, Moderators
-
- Trader
- Posts: 16367
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Crank shaft not shifting
Thanks for all the advice folks - removed plugs, sprayed plusgas in there - turned fine after the slightest of pressure on the wrench - now to see if it starts!