door seals

[Gixerman60]

Fitted new ones a few weeks ago. Managed without fully removing doors, just disconnected door straps, and loosened hinge and latch bolts/screws. Fiddly job, I applied glue to bottom of channel and body tape to side. Because the seals I bought did not have holes ready for clips I made these with a red hot drill after a dry run to find where holes should be. Seals had to be stretched slightly as well. Clips were tricky to put in, as were seals - I used a wide headed punch plus a big flat blade screwdriver. Do not use Gorilla glue as it expends too much, I used a 2 pack Arraldite for the second one. Seals seem to be overlarge, and gradually settling. Contact me if help needed.