Where is the T-piece in the windscreen washer piping

[adsnape]

Bugger: Just had the lower front windscreen welded and the RHS windscreen squirter (on a LHD van) no longer works, took the jets off and NO HOSE. it was a bit short anyway, I think it has just come away during work. So now I have the dash pod off, under dash shelves out and legs up in the air trying to find the end - I have decided to just repipe from the T piece, but I cannot find that. Can anyone tell me, inside or outside for starters, then Ill track it down from the reservoir. Trying to fix it during lunch but its not going to happen I think.
Thanks

[hubcap61]

[hubcap61]

Ignore the big yellow arrow!

[adsnape]

so behind the top bulkhead part?
THanks

[lefty67]

Inside. Follow pipe from filler bottle and t-piece is at top in the corner as per diagram. A bit fiddly but easy enough.

[Robsey]

It is up under the dash, between the glove-box and heater casing. (On a UK van).
So left side of the heater blower casing.
Near to the wiper motor on my van.

I would say a glove box out job for better access.

[Aidan]

just checked on my lhd and the t piece is to the right of and behind the brake servo next to the plastic heater hose, easy access through the dash binnacle with the binnacle removed you can see through the steering wheel where you are working and where your hands are; be aware the rubber hose over the joins either side of the t piece doesn't let go easily, they very rarely leak from the factory as they are done belt and braces style as a sub assembly, and fitted before the dash