Front accelerator cable bracket???

Technical questions & answers only, you must register to post but anyone can read.

Moderators: User administrators, Moderators

Forum rules
Technical questions & answers only. Please try to search the Wiki or Tech Archive first.
Post Reply
Rusty_T25
Posts: 1
Joined: 19 Jul 2022, 17:52
80-90 Mem No: 0

Front accelerator cable bracket???

Post by Rusty_T25 »

I am a new comer to the T25, and am struggling to find any information about a U shaped bracket that is located about 6 to 8 inches behind the accelerator pedal. The accelerator cable passes through the U shape in two places, but all I have is a rusty floor pan and a rusty bracket. I can't see how it should be attached, or exactly what its purpose is. I did see it on one of the spares sites, just before I bought the van, but since then, I haven't been able to find it, or any information about it. I was told, by one of the spares suppliers, that this was the place to come. I can supply a picture of the rust, if that would help.

Thanks in advance. :ok

davidoft1
Trader
Posts: 2579
Joined: 27 May 2009, 18:56
80-90 Mem No: 16628
Location: hayling island

Re: Front accelerator cable bracket???

Post by davidoft1 »

The position doesn’t really matter as it’s just for the cable to run inside of

Plasticman
Trader
Posts: 8047
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: Front accelerator cable bracket???

Post by Plasticman »

As above,
they spot weld to the underside of the floor, if your floors missing then when you mqake a repair  drill 2 8mm holes in it where youd like the bracket to sit then a quick once over with a soft pad and puddle weld through it,
mm

jacky67
Posts: 1
Joined: 13 Feb 2024, 15:10
80-90 Mem No: 0

Re: Front accelerator cable bracket???

Post by jacky67 »

Rusty_T25 wrote:
> I am a new comer to the T25, and am struggling to find any information
> about a U shaped bracket that is located about 6 to 8 inches behind the
> accelerator pedal. The accelerator cable passes through the U shape in two
> places, but all I have is a rusty floor pan and a rusty bracket. I can't
> see how it should be attached, or exactly what its purpose is. I did see it
> on one of the spares sites, just before I bought the van, but since then, I
> haven't been able to find it, or any information about it. I was told, by
> one of the spares suppliers, that this was the place to come. I can supply
> a picture of the rust, if that would help.
>
> Thanks in advance. :ok
hello
that bracket is likely a support system for accelerator cable.

Post Reply